Turbosound NUQ102-AN-WH, 600W 2-Way 10" Full Range Powered Loudspeaker w/ Klark Teknik DSP Technology & UltraNET Networking (White) - ( OPEN BOX )

Turbosound NuQ102-AN-WH 600W 2-Way 10" Full-Range Powered Loudspeaker with KLARK TEKNIK DSP Technology and ULTRANET Networking (White)

The white NuQ102-AN-WH 600W 2-Way 10" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ102-AN-WH Loudspeaker provides optimal performance for FOH, side fill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ102-AN-WH Loudspeaker features a 10" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ102-AN-WH Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 600W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low-volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability.

On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ102-AN-WH Loudspeaker via a Windows computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi-matte white paint, the trapezoidal cabinet is constructed from 12mm birch plywood, and includes a rugged powder-coated perforated-steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ102-AN-WH Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains-power input is provided via a Neutrik powerCON connector.

• 2-way full-range powered loudspeaker for portable PA applications
• 600W power featuring KLARK TEKNIK Class-D technology for total system control
• ULTRANET digital-audio networking connects to mixers and other sources
• 10" low-frequency driver with low-mass voice coil for improved transient response
• Aluminum dome with 1" neodymium motor compression driver
• Rotatable converging-elliptical waveguide provides 100 x 60° (horizontal x vertical) dispersion
• Fully featured user interface with LCD display for ease of navigation
• PC remote-control software downloadable
• 12mm birch-plywood enclosure with hard-wearing semi-matte white paint finish
• Rugged powder-coated perforated-steel mesh grille
• Integral 35mm pole mount and handles
• Multiple internal rigging points allow bracket mount and suspension in any orientation
• Mains input on Neutrik powerCON connector

Specifications: System Frequency Response

55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB

Nominal Dispersion

100° H x 60° V @ -6 dB points, rotatable

Maximum SPL

122 dB peak

Crossover Type

Active

Transducers

1 x 10" (261.5 mm) LF driver
1 x 1" (25.4 mm) HF compression driver

Limiter

Independent HF, LF, peak and rms

Amplifier Maximum Output Power*

600 W

Type

Class-D

Protection

Short circuit, thermal

Connectors Input/link

1 x Combo Jack/XLR 1 x XLR

Ultranet input/link

2 x RJ45

Mains Supply

Neutrik powerCON 20A†

Controls DSP

Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions Factory EQ Presets

Positioning, Sound mode, FBQ

Display

LCD 128 x 32, blue, backlit

Delay

0 - 300 ms

Equalisation

High and low shelving EQ
2 x parametric EQ

Limiter

Zero attack input limiter

Presets

20 total presets, 19 user-definablenable

Crossover

High Pass L-R 24 dB/oct

Protection

Lock-out function for all settings

Ultranet Digital Network Digital processing System Cabling
Power Supply Power consumption

80 W @ 1/8 max power

Voltage (fuses)
Enclosure Dimensions HWD

525 x 318 x 281 mm (20.7 x 12.5 x 11.1")

Net weight

13.7kg (30.2 lbs)

Construction

12 mm (½") birch plywood

Finish

Semi matt white paint

Grille

Powder coated perforated steel

Flying hardware

M10 x 8 points; M8 x 1 point

Accessories (Not Included / Sold Separately)

NuQ102-SB swivel bracket for NuQ102
NuQ102-EB extension bracket for NuQ102
NuQ102-FY flying yoke for NuQ102

*independent of limiters and driver protection circuits
Neutrik and powerCON speakON are registered trademarks of Neutrik AG.
Only qualified personnel are allowed to modify the AC-Main cord and to adhere to all
applicable national standards