UNIQUE | Rinse Away Water Soluble Stabilizer | 48 × 91 cm
- Brand: UNIQUE Sewing
- Type: Rinse Away Water Soluble Stabilizer
- Composition: 100% Polyester
- Size: 48 × 91 cm - 18 3/4" × 36"
- Application: Machine Embroidery & Decorative Stitching
- Removal: Rinses Away with Water
Quantity: 1 = 1 Piece
Create clean, professional-looking machine embroidery and decorative stitching with the UNIQUE Sewing Rinse Away Water Soluble Stabilizer. Designed for use with washable fabrics, this stabilizer provides temporary support during stitching and can be removed with water once your project is complete.
The stabilizer helps prevent fabric from puckering and shifting while stitching, helping embroidery and decorative stitches maintain their intended shape. Once the excess stabilizer is removed and the remaining material is rinsed away, the embroidered fabric can retain its original feel without unwanted stiffness or added bulk.
It is especially useful for machine embroidery projects where you do not want a permanent stabilizer remaining behind the finished design.
For Best Results:- Use only on projects made from washable fabric and thread.
- Test the fabric, thread and stabilizer on a sample before beginning the final project.
- Position the stabilizer on the back of the fabric.
- Pin, baste or use a temporary adhesive to hold the stabilizer in place.
- Using an embroidery hoop can help keep the stitching area taut while you work.
- Carefully tear away the excess stabilizer after stitching.
- Dissolve the remaining stabilizer under running water or in a large basin of water.
- A small amount of fibre may remain close to the stitching after the initial rinse and will gradually dissolve with subsequent washing.
- Machine embroidery
- Decorative machine stitching
- Washable garments
- Embroidered accessories
- Projects where a permanent stabilizer is not desired
What size is the Rinse Away stabilizer?
Each piece measures 48 × 91 cm (18 3/4" × 36").
Is this stabilizer water soluble?
Yes. It is designed to dissolve in water after the excess stabilizer has been removed.
What is this stabilizer used for?
It is designed primarily for machine embroidery and decorative stitching on washable fabrics, helping prevent the fabric from puckering or shifting while stitching.
Does the stabilizer remain in the finished project?
No permanent backing is intended to remain. Tear away the excess stabilizer and rinse the remaining material with water. A small amount of fibre may remain close to the stitching initially and dissolve during subsequent washing.
Can I use it on any fabric?
It should be used on washable fabrics only. The manufacturer recommends testing the fabric, thread and stabilizer together on a sample before working on the final project.
Should the stabilizer go on the front or back of the fabric?
For the application shown by the manufacturer, position the stabilizer on the back of the fabric and secure it before stitching.
Contact the merchant to order:
