ADAM AUDIO SUB10 PRO - Subwoofer delivering intelligent bass -DSP technology
The Sub10 PRO combines advanced DSP, powerful low-frequency audio reproduction and network-based calibration for stereo and multichannel monitoring systems. Its high-excursion 10” woofer and Class D amplifier deliver plentiful SPLs with minimal distortion thanks to the FEA-optimized bass port.
Professional connectivity on the backplate includes AES3 digital, balanced analog XLR and TRS, precise phase and crossover controls, plus a footswitch input for bass management. ADAM Control facilitates manual calibration over 4-bands of parametric EQ, plus the deployment of Sonarworks calibration profiles and firmware updates.
Three operating modes – Stereo, LFE and Wide – support conventional 2.1, immersive, and full-range applications. A robust wooden cabinet and protective metal grille ensure durability that is backed by a 2-year warranty, extendable to 5 years upon product registration.
Fiber-reinforced, paper-based 10” Woofer
Total Peak Amp. Power: 200 WCalibration options: ADAM Control, SoundID Reference by Sonarworks, Backplate
Frequency Response @ -6 dB: 21 - 300 Hz
Max. SPL at 1 m (Peak): 106 dB SPL
-
General Data
- Cabinet Design: Front Fire and front ported
- Cabinet Material: Vinyl wrapped MDF and painted MDF front panel
- Power consumption (max, standby): 450 W, 2.5 W
- AC Input Voltage: 100 – 240 V, 50/60 Hz
- Power Rating: 450 W max.
- Operating Conditions: -10° C to +40° C (+14° F to +104° F); <75% RH, non-condensing
- Weight: 22.8 kg (50 lbs 4 oz)
- Dimensions (Height x Width x Depth): 450 mm x 360 mm x 450 mm (17 3/4″ x 14 1/8″ x 17 3/4″)
- Warranty: 5 years (2 years warranty plus 3 years optional with product registration)
- Delivery Contents: Sub10 PRO subwoofer, power cable, Quick Start Guide
-
Audio Connectors
- Analog Inputs: 2 x XLR / TRS combi
- Digital Input: XLR AES3
- Analog Input Impedance: 25 kOhm
- Digital Input Impedance: 110 Ohm
- Max. Input Level: +19 dBu
- Analog Outputs: 2 x XLR
- Digital Outputs: XLR AES3
-
Amplification
- Amplifier Type: PWM
- Peak (10% THD, limiter deactivated): 325 W
- RMS (1% THD, limiter deactivated): 200 W @ 3 Ohm
-
Control Options [via Network]
- Networking Connector: RJ45
- Connection Type: Ethernet
- Communication Protocol: AES70 / TCP
- Control Software: ADAM Control (Windows and MacOS available)
- Advanced Room Adaptation: 4-bands QEQ
- Third-party calibration compatibility: Sonarworks SoundID Reference
-
Acoustics
- Frequency Response @ -3 dB: 22 – 264 Hz
- Frequency Response @ -6 dB: 21 – 300 Hz
- Crossover Frequencies: 70, 85, 100, 115 Hz (variable via ADAM Control)
- Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (RMS): 106 dB SPL
- Max SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (Peak): 110 dB SPL
- Max SPL in full space at 1 m with sine bursts (average 25 Hz to 50 Hz) @ 10% THD (RMS): 102 dB SPL
- Max SPL in full space at 1 m with sine bursts (average 25 Hz to 50 Hz) @ 10% THD (Peak): 105 dB SPL
- Max peak SPL in full space at 1 m with IEC-weighted noise (full range): 113 dB SPL
- Max peak SPL in full space at 1 m with IEC-weighted noise (85 Hz bass managed): 114 dB SPL
- Dolby DARDT max SPL in full space (full range bass managed): 113 dB SPL
-
Driver
- Basket Diameter: 10″
- Voice Coil Diameter: 1 3/4″ (45 mm)
- Cone Material: Paper, fiber-reinforced
-
Signal Processing
- AD converter: 24-bit (via XLR/TRS inputs)
- Internal sample rate: 96 kHz
- Delay range and resolution: 0 – 10 ms, 32-bit
- Protection: Independent peak and thermo limiters, over current protection, over temperature protection, under voltage protection
-
Control Options [via Backplate]
- Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting, full space
- Level: -18 dB to +6 dB
- Input Selection: Analog, digital
- Phase: 0°, -45°, -90°, 135°, 180°, -225°, -270°, -315°
- Bass Management: 70, 85, 100, 115 Hz
- Operational Modes: Remote Control, Local / Stereo, LFE (<120Hz), Wide
- Bypass: Yes, via footswitch (not included) and TRS connection (latched)
Contacter le commerçant pour commander :